Moisture Measurement

Call for Pricing and Information or use the REQUEST FORM at the bottom of this page.
Component Sales & Service carries a large inventory of materials testing equipment and supplies.
If you have any questions regarding a listed product, or if you do not see the equipment you require,
please contact us at our toll free number 1-800-992-4205




Moisture Measurement System (MMS)

Moisture Measurement System (MMS) The Moisture Measurement System (MMS) is a powerful and versatile instrument for measuring concrete floor moisture, as well as a wide range of other dampness conditions in buildings. With the included probes, the user can switch between hygrometer and moisture meter modes to gain a thorough understanding of the extent of moisture or dampness related problems within the structure.
The complete system consists of the MMS instrument, a hygrometer probe, extension lead, pin-type moisture probe, two deep wall probes, direct-contact surface temperature sensor, calibration check device, carrying case, batteries and detailed instruction manual. For users who desire to imbed sensors in the floor or use the sleeve method for concrete floor moisture test applications, optional fivepack hygrometer probes and humidity sleeves are available.
Meets ASTM E1907.
  • Humboldt H-2995    Get Pricing       Get Information




  • Soil Moisture Tester

    Model HM-672 digital LCD meter indicates soil moisture at various locations and/or depths by attaching to leads from permanently or semi-permanently placed soil sensors. The 0-100 arbitrary-scale meter readings can be used directly or converted to available soil moisture or soil moisture tension via included calibration curves. Range is 0.1-15 bars tension. Meter electronics are housed in a rugged ABS case with tactile membrane switch panel. Case measures 4.75x2.75x1.25" (121x70x 44mm), HxWxD. A 9V battery and carrying case are included. Shipping Data: 1 lb (0.5kg); Cu. Ft.: 0.1.
    Sensors are ordered separately in pack of 10 with standard 6-ft (1.8m) or extra-long 25-ft. (7.6m) leads which attach to spring-loaded binder posts on the meter for taking readings. Each sensor block is made of gypsum cast around two concentric stainless steel electrodes and measures 7/8" diam. x 1-1/8"H (22x29mm).
  • Gilson HM-672    Get Pricing       Get Information




  • Ohaus Moisture Analyzer

    The Ohaus OB-45M has a 45g capacity with 0.001g/0.01% resolution. A versatile, graphical backlit display shows drying curve, percent moisture, percent solids, time, temperature and more. A fast halogen element provides uniform infrared heating up to 40% faster. Temperature range is 50-200°C. This model features easy-to-use software, data output, program storage capabilities, and is user customizable. Power is 120V AC, 50/60Hz. Pan Size: 3.5" (40mm). Overall Dimensions: 7.5x6x14" (190x152x360mm), WxHxD.
  • Gilson OB-45M    Get Pricing       Get Information




  • Thermolyne Moisture Tester

    The Moisture Determination Oven fully automated moisture content determinations for aggregate, soil and asphalt laboratory samples up to 4000 grams. Internal balance monitors change in mass during the test. Endpoint is reached when change does not exceed 0.01%. User may select different, less sensitive endpoints. An audible alarm signals test completion and a hard copy printout is provided from the built in printer.
    Having many applications in the modern construction materials lab, the Moisture Tester saves time by eliminating continual manual weighing of sample to determine stability. Asphalt laboratories have found it to be a useful timesaver for sample preparation as required in both Superpave and conventional testing. Accuracy and uniformity of test results are assured and technicians are free to perform other duties while tests are in progress. This unit may also be used as a conventional laboratory oven with the 2 extra shelves provided.
  • Thermolyne OV114525    Get Pricing       Get Information




  • Speedy 2000 Moisture Tester

    The Speedy 2000 Moisture Testers are widely accepted for rapid, accurate, and reliable moisture tests on all kinds of materials–sand, aggregates, ores, coal, soils, ceramics, abrasives, and other powders and chemicals. Units are portable, easy to use and do not require a power supply. Samples can be tested on-site, eliminating risk of moisture loss during transport.
    All units have tough, die-cast polished aluminum body (pressure chamber) with integral dial. Weighed sample is placed in the tester with measured quantity of calcium carbide reagent and sealed with a cap. Upon agitation, free moisture in test sample reacts with reagent to form acetylene gas. Pressure gauge reads directly in % moisture within 1-3 minutes.
  • Humboldt H-4967    Get Pricing       Get Information
  • Gilson MA-25    Get Pricing       Get Information




  • MiniTrase Portable TDR Kit

    Using Time Domain Reflectrometry (TDR) the MiniTrase has proven reliability around the world in harsh environments. “Plug and play” STD BUS architecture, plus a wide selection of waveguides and standard or customizable lookup tables. Aluminum waterproof case, indicator lights, “quick change” batteries and optional multiplexing; this CE device is ready for work!
    The MiniTrase features significantly reduced weight, size and cost. MiniTrase provides the largest signal pulse of any standard commercial TDR instrumentation used in soils or dielectric measurements. This means you get a return reflection from waveguide end points buried deep in wet, salty conditions. MiniTrase uses the proven step pulse methodology that is the expected standard for TDR measurements, a fact that is appreciated and acknowledged by discerning scientists worldwide.
  • Humboldt HSM-2060    Get Pricing       Get Information



  •  

    Please check all information you provide  
    Required Information ®
    Your Name: ®
    E-Mail: ®
    Address:
    City:
    State or Province:
    Postal Code (Zip):
    Country:
    Phone:
    FAX No.:
    How would you prefer to be contacted with your information?
    Email   Mail   Phone   FAX  
    Please enter additional comments or questions in the box below:

    Please contact as soon as possible regarding this Quote.




    Click only once to submit request!
     
    Please note that, Component Sales & Service, Inc. has limited distribution areas on some products within the United States
    Inquires made from States that are not in our contractual area shall be redirected to the manufacture or regional distributor


    [ FAQ | CONCRETE | ASPHALT | SOIL | PRODUCTS | SERVICES | RFI | RFQ | SITE MAP | LINKS | TERMS | ABOUT US | EMAIL ]
    Thank you for using Component Sales & Service Inc.